correción de 2.90: ahora 2.91
"Flash Memory
Version 2.91
Released 4/24/20
Works with:
HX Stomp
Helix/HX 2.91
Helix/HX 2.91 includes important bug fixes, and is strongly recommended for all Helix and HX owners.
IMPORTANT!
Carefully read and follow the update instructions below. If you don’t — and then run to the forums asking why it’s not working—the interwebs will make fun of you.
Updating to 2.91
Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp
STEP 1 — Updating HX Edit to 2.90 (assuming you haven’t done this already)
Log onto line6.com , download, and install HX Edit 2.90:
macOS:
https://line6.com/software/readeula.html?rid=9678
Windows 7/8/10:
https://line6.com/software/readeula.html?rid=9677
STEP 2 — Updating Helix/HX Firmware to 2.91
If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you’re not signed in, click “Check for Updates” in the lower right corner and sign in. If you’re already signed in, a dialog panel appears, indicating an update is available.
Click “Update Now.” A window appears, asking you to back up your Helix / HX hardware. Click OK, optionally rename the backup and / or choose a different destination folder, and then click “Create Backup.” IMPORTANT! Note the location where you’ve saved the backup.
Continue following the prompts. Once updated, the window reads “Update Complete” and your Helix / HX hardware begins rebuilding its presets; wait for this to complete and click “Back to HX Edit.”
From the File pull-down menu, click “Restore from backup…” A dialog appears. Click “Restore Backup” and then “Yes.”
Turn your Helix / HX product off and then on again.
If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads “Helix Control must be updated to work properly.” Press Knob 6 (OK).
Bug Fixes in 2.91
Resolves multiple unexpected behavior that can occur when adjusting the Volume knob, entering the Tuner, or other actions during the first 30 seconds after power up—FIXED
Engaging the Tap Tempo switch would calculate a different tempo than intended—FIXED
When routing Path 1 to Path 2, the Path 2A andor Path 2B input blocks could display clipping even when the signal was not—FIXED/
For presets with parallel paths, the Mixer > Merge block boosts signals by 3dB—FIXED
Known Issues in 2.91
A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix RackControl)/
In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
In rare cases, after exporting and then importing presets using HX Edit, the Split block’s bypass state can sometimes change (Helix Floor, Helix RackControl, Helix LT)/
When using Blue Cat Audio’s PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)
The Looper block’s Overdub function does not currently respond to incoming MIDI (HX Stomp)
While connected to HX Edit, quickly changing models through the IR block can sometimes result in a unit freeze (HX Stomp)
Compatible OS: Mac OS X, Windows 7, Windows 8, Mac OS Yosemite, Windows 10, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave, macOS Catalina "
extraído de su web oficial
.
) 