A/DA GCS-2 emulador de pantalla analogico y caja DI MADE IN USA
Por jmlguitars el 04/10/2016 en Alicante
Expiración: 19/11/2016 | Visto 415 veces
105€
El anuncio ha sido retirado.
Otros anuncios que te pueden interesar
-
Etapa VHT 2:50:2 en Valencia1000 €
-
Boss AB-2 (Selector 2 vías) en Madrid30 €
-
Tech21 GT-2 en Madrid90 €
-
Raimundo bosanova 2 en A Coruña420 €
-
Empress Tremolo 2 en Barcelona140 €
A/DA GCS-2 emulador de pantalla analogico y caja DI
en perfecto estado
Selectable 10” or 12” Speaker Size
Selectable VINTAGE (Alnico) or MODERN (Ceramic) Speaker Character
Selectable OPEN BACK or SEALED Cabinet Type
Variable MICROPHONE PLACEMENT Control to “position” the mic for deep or bright frequency response.
¼” phone jack INPUT with a direct, un-buffered PASS THROUGH ¼” phone jack. This effectively splits the signal to feed both a guitar amplifier (the THRU) and a mixing console (one of the outputs, either ¼” phone single ended or XLR balanced)
XLR Balanced Output has selectable LINE or MIC LEVEL Output and a GROUND LIFT for Pin 1
Pure Analog Circuit Design using thru-hole, low-noise components
Rugged all-steel chassis with durable powder coat finish
Powered by a single industry standard 9VDC AC Adapter, but runs internally at 18 volts for higher headroom and lower noise
Dimensions: Width: 3.35" Length: 4.2" Depth: 1.8"
Designed and manufactured in California
https://reverb.com/item/50079-a-da-gcs-3-guitar-cabinet-simulator-di-box
https://www.youtube.com/watch?v=OzppX8OdXeU
http://www.musicradar.com/reviews/guitars/a-da-gcs-2-567070
en perfecto estado
Selectable 10” or 12” Speaker Size
Selectable VINTAGE (Alnico) or MODERN (Ceramic) Speaker Character
Selectable OPEN BACK or SEALED Cabinet Type
Variable MICROPHONE PLACEMENT Control to “position” the mic for deep or bright frequency response.
¼” phone jack INPUT with a direct, un-buffered PASS THROUGH ¼” phone jack. This effectively splits the signal to feed both a guitar amplifier (the THRU) and a mixing console (one of the outputs, either ¼” phone single ended or XLR balanced)
XLR Balanced Output has selectable LINE or MIC LEVEL Output and a GROUND LIFT for Pin 1
Pure Analog Circuit Design using thru-hole, low-noise components
Rugged all-steel chassis with durable powder coat finish
Powered by a single industry standard 9VDC AC Adapter, but runs internally at 18 volts for higher headroom and lower noise
Dimensions: Width: 3.35" Length: 4.2" Depth: 1.8"
Designed and manufactured in California
https://reverb.com/item/50079-a-da-gcs-3-guitar-cabinet-simulator-di-box
https://www.youtube.com/watch?v=OzppX8OdXeU
http://www.musicradar.com/reviews/guitars/a-da-gcs-2-567070
OfertasVer todas
-
Harley Benton TE-90FLT Black Blast149 €Ver oferta
-
PRS 70th SE McCarty 594 SC QuiltBO1.055 €Ver oferta
-
Harley Benton DC-Junior LH TV Yellow199 €Ver oferta
Usuario
Registrado 09/08/2012
Comentarios180
Posts en foros57
Anuncios12
Seguidores98
Fotos20
Vídeos2
Mercasonic Score