TECH 21 FLYRIG5 V1
Por juanmafmj el 07/03/2021 en Baleares
Expiración: 06/05/2021 | Visto 426 veces
150€
Este anuncio ha expirado.
Otros anuncios que te pueden interesar
-
TECH 21 Fly Rig en Barcelona150 €
-
Tech 21 Sans Amp Gt2 en Girona195 €
-
PANTALLA para ampli bajo TECH-21 410 en Barcelona400 €
-
Fuchs Blackjack-21™: 2 x 6V6 21 vatios en Barcelona1150 €
-
210 €
Vendo Flyrig5 v1, usado pero funcionando 10/10. Descatalogado.
NO CAMBIOS. NO NEGOCIABLE
ENVÍO CERTIFICADO INCLUIDO.
SansAmp tube amplifier emulator, is pre-voiced for clean tones. It includes 3-band active EQ, Level,
and Drive to adjust the overall amount of gain and overdrive.
• Reverb, within the SansAmp section, is based upon the Boost RVB pedal. It emulates the rich ambiances of a vintage spring reverb without clattery pings, canyons of doom, or other annoying artifacts.
• Plexi, based upon the Hot-Rod Plexi pedal, brings in the organic distortion of a stock ‘68 Plexi and includes Level, Tone and Drive controls.
• Hot, within the Plexi section, kicks in up to 21dB of pre-amp gain. It can be used independently to
boost the SansAmp and/or DLA functions, as well as on its own to boost the gain of your amp.
• DLA is based upon the Boost DLA pedal. It is voiced to give you the sounds of a vintage tape echo
and features Level, Time, Repeats, and Drift, which adds a random element to the modulation for authentic textures. A dedicated Tap Tempo switch makes it super simple to just tap in the delay tempo you want during your performance.
• All analog signal path; reverb and delay are mixed in parallel.
• Get 5 “must-have” gigging pedals for 1/3 the cost at 1/3 the size, without sacrificing pro quality tone.
• All metal housing in gunmetal finish.
• Metal footswitches and jacks.
• 1/4-inch high-impedance input.
• 1/4-inch low impedance output.
• Silent-switching, custom footswitch actuators.
• Utilizes included 12V DC power supply, 150mA, center negative.
NO CAMBIOS. NO NEGOCIABLE
ENVÍO CERTIFICADO INCLUIDO.
SansAmp tube amplifier emulator, is pre-voiced for clean tones. It includes 3-band active EQ, Level,
and Drive to adjust the overall amount of gain and overdrive.
• Reverb, within the SansAmp section, is based upon the Boost RVB pedal. It emulates the rich ambiances of a vintage spring reverb without clattery pings, canyons of doom, or other annoying artifacts.
• Plexi, based upon the Hot-Rod Plexi pedal, brings in the organic distortion of a stock ‘68 Plexi and includes Level, Tone and Drive controls.
• Hot, within the Plexi section, kicks in up to 21dB of pre-amp gain. It can be used independently to
boost the SansAmp and/or DLA functions, as well as on its own to boost the gain of your amp.
• DLA is based upon the Boost DLA pedal. It is voiced to give you the sounds of a vintage tape echo
and features Level, Time, Repeats, and Drift, which adds a random element to the modulation for authentic textures. A dedicated Tap Tempo switch makes it super simple to just tap in the delay tempo you want during your performance.
• All analog signal path; reverb and delay are mixed in parallel.
• Get 5 “must-have” gigging pedals for 1/3 the cost at 1/3 the size, without sacrificing pro quality tone.
• All metal housing in gunmetal finish.
• Metal footswitches and jacks.
• 1/4-inch high-impedance input.
• 1/4-inch low impedance output.
• Silent-switching, custom footswitch actuators.
• Utilizes included 12V DC power supply, 150mA, center negative.
Características declaradas por el vendedor
Estado: Excelente
País de fabricación: Estados Unidos
OfertasVer todas
-
Harley Benton DNAfx GiT139 €Ver oferta
-
EarthQuaker Devices 70th Anniv. Plumes S Shredder129 €Ver oferta
-
-21%Harley Benton Fusion-T HH Roasted FBB298 €Ver oferta
Usuario
Registrado 01/10/2014
Comentarios11
Seguidores7
Fotos4
Mercasonic Score