Klinger Buzz Fuzz II (Burns Buzzaround - Tone Bender mk III)

Vendo o cambio uno de los mejores y más demoledores fuzz que he probado. Se trata de un Klinger buzz fuzz II. con las siguientes características:

* Basado en el Burns Buzzaround, que puede escucharse en temas de King Crimson.

* El diseño del Burns Buzzaround es muy similar al del Tone Bender mkIII, con tres transistores de germanio y con control extra de tono. Yo lo he comparado con un excelente Tone Bender MKII, y son muy similares en tono, pero el Klinger es muuuucho mase versátil.

* Mismos controles que el Buzz Fuzz I, con control extra de PreGain para obtener mayor paleta de Fuzz/Distorsión.

* Funciona con pila o con cargador estandar Boss, pero como otros fuzz debe usarse con cable aislado (no compartido con otros pedales)

* Con los mejores componentes: transistores NOS de Germanio, placa vintage, Carbon Composite resistors, Teflon wire

* True bypass

* Responde igual de bien con singles y humbucker, como puede verse en estos vídeos:

https://www.youtube.com/watch?v=wwtqG1pgABU

https://www.youtube.com/watch?v=ux6B7rda1wQ


En perfecto estado, esteticamente impoluto salvo en la base que el velcro se llevo parte de la pintura.

El pedal acaba de pasar por el taller, se le sustituido un condensador, revisados los transistores de germanio, limpiado y engrasado de potes.

Envío incluido.

Aquí la parrafada completa en ingles:

"The Buzz Fuzz II based on the Burns Buzzaround. Maybe one of the greatest fuzzes to be unhyped by the 'modern fuzz generation'. This fuzz can be heard on the classic King Crimson Recordings. I was able to capture the character that the pedal produced and bring you the Buzz Fuzz.

The Buzz Fuzz II has the same Tones found in the original Buzz Fuzz with a few extra features:

- Smaller Pedal Board Friendly enclosure
- Extra Control (Pre Gain) to help tame and create more Fuzz / Distortion tones
- Bright Red LED
- Standard Boss style DC jack (Use only isolated Power supply/ not to be daisy chained)

****Voodoo labs Pedal Power 2 is recommended

- Treble modification in Tone control for smoother highs

I have kept the internal construction of the pedal similar to the first Buzz Fuzz, whilst incorporating my high quality workmanship and years of amplifier construction experience the pedal includes:

- Vintage style turret board construction
- High quality Carbon Composite resistors
- Teflon wire
- True bypass
- Switchcraft Jacks
- Gain and Leakage tested Vintage NOS Germanium Transistors

The Four controls on the Buzz Fuzz II are Pre Gain, Sustain, Balance and Timbre.
- The Pre Gain control allows the player to have the ability to tame the input to the circuit, this allows Fuzz and Dirt sounds not possible with the 3 control version.
- Sustain goes from Tasty Growl to Full on Hairy Fuzz.
- The Balance control is the Volume control which is interactive with the Timbre.
- Timbre control: At bass settings on the Timbre control you will have a little more volume than on full treble (clockwise)

I hope you like the New Buzz Fuzz II it makes a great go to Fuzz and tone shaping tool on any Pedal board."